BHK03 HYDRAULIC TAPPING MACHINE
Our BHK03 model tapping machine, which is a member of the BHK Series hydraulic tapping machine group, is our model working with M5-M36 capacity with low speed high torque feature.
They are extremely ergonomic, powerful machines produced to end tapping problems. The BHK series machines, which can be tapped in any diameter between M5 and M36, can be adjusted to the desired torque and revolutions thanks to their features, so they fulfill their tasks without error and in the easiest way.
The moving arm mechanism on the bluetech tapping machines is capable of scanning a large area, and it can be approached to the parts, with the most precision, connected to the T-channel table and the other points around the machine. The angularly alterable head of the bluetech tapping machines can be adjusted horizontally, vertically or angularly, depending on the position of the workpiece, and can be easily fixed at any desired angle.
The Bluetech BHK serial machines can be used not only for tapping , but also for reaming, countersinking and threading operations.With Bluetech tapping machines, you can perform all of these operations perfectly and in the shortest time.
M5 - M36 Tapping Capacity
Our Bluetech BHK03 model machine easily performs large tapping operations with its strong body and strong arm mechanism ,high torque, low speed capacity.
The universal head system in our tapping machines enables horizontal, vertical and angle tapping according to the position of the work piece
Forward and Reverse Speed Control
In our tapping machines, the forward and reverse rotation speeds of the tool are controlled via the electronic system, not the hydraulic system.
Thanks to this system, forward and return speeds can be adjusted easily, precisely and independently from each other, the oil is prevented from heating up , and the rotation speed can be read instantly on the digital counter screen on the machine.
Tool Breakage Safety
Thanks to the clutch and torque adjustable tool holders used with our tapping machine, when the tool is jammed on the tapped piece or when the end point is reached in the blind holes, the safe tool holder activates and prevents the tool from breaking.
MQL - Lubrication System
Tapping is a difficult machining process that is very sensitive to friction and heating. Applying the correct lubrication system during operation results in longer tool life, more production, more precise tolerance size, smoother threading and more efficient stock removal.
Patented MQL technology integrated into Bluetech tapping machines is a technique used by adding a very small amount of oil into compressed air that moves very quickly.
Lubrication is done with an aerosol consisting of fine oil droplets mixed into the air stream.
This system reduces the use of oil significantly and minimizes environmental impact. It eliminates the need for refrigerant treatment. It creates a high job security and healthy working environment.
30 mm T Grooved Work Table
In Bluetech BHK03 and BHK04 models, 30 mm thick and 900x700 mm T-slotted table is used as standard.
(This table is optional for our other models..)
M5 - M36
700 x 900
A: 500 | B: 2050 | C: 920 | D: 700
Optionally adjustable cycle setting
24 V operating voltage for operator safety
Pressure / Torque Setting
Optionally adjustable pressure-torque setting
Phase Protection System
Phase protection system preventing the electric motor and the hydraulic pump from operating in the reverse direction.
Tool Breakage Safety
Tool breakage safety with special guide holders
Moving arm mechanism that can extend up to
Quick and easy tool changing
3 Axis Operation
Vertical, horizontal and angular tapping
Ground Steel Table
30 mm Grooved table
It easily performs tapping operations in all sizes between M5 to M36
4 KW - 380 V Electric motor